How do I know if my left speaker is working?
Play the Left test at a low volume. You should hear a tone only from the left output. If not, verify the device is selected as the system output and that cables or wireless pairing are correct.
Test My Speaker
Check whether your left and right speakers (or headphones) are wired and balanced correctly. Free, private, and runs entirely in the browser—no download, no microphone.
Generated locally with the Web Audio API
Signal
Idle
Lower your system volume before starting. Stop immediately if the sound feels uncomfortable.
Speaker channels
440 HzTest modes
What to listen for
Choose a channel or test mode. A clear, steady signal should match the control you selected.
Did you hear it?
Your response is informational only; the site does not diagnose speaker hardware.
How to use
Lower your system volume first, then open the test console below. Tap Left to send a tone only to the left channel, Right for the right channel, or Both for a combined check.
If you only hear one side, check cable seating, Bluetooth pairing, OS output device selection, and whether the speakers are physically swapped. On phones with a single bottom speaker, true stereo separation may be limited.
This page targets queries like “online left right speaker test” and “left right sound test” with a dedicated URL, title, and channel-first UI so you can deep-link the exact check you need.
Left-right FAQ
Play the Left test at a low volume. You should hear a tone only from the left output. If not, verify the device is selected as the system output and that cables or wireless pairing are correct.
Balance sliders, damaged drivers, uneven placement, or mono downmix can make one side quieter. Compare Left and Right tests at the same volume, then check OS balance settings.
Yes, especially with wired or Bluetooth headphones. Built-in phone speakers may not fully separate channels depending on hardware layout.
Yes. The tones are generated locally with the Web Audio API. Nothing is uploaded and no app install is required.